Canton makes a Tiger-specific oil pan... maybe they're sympathetic to our
plight. Phone them up and find out how much material could be removed from the
rear corner of the adapter without going through, and see if this will let you
mount it.
Theo
Kathy and Erich Coiner wrote:
> I bought an adapter from Canton racing products that matches your
> description.
> It does NOT fit on my car with headers. 1.5 inches is too tall at the rear.
> The stock tiger adapter clears the header by about a 1/2 inch.
>
> Erich
>
> ----- Original Message -----
> From: "DrMayf" <drmayf@teknett.com>
> To: <tigers@autox.team.net>
> Sent: Wednesday, April 16, 2003 9:09 PM
> Subject: Oil Filter Block Adapter..
>
> > Was surfing through the Racer Parts Wholesale catalog and ran across some
> > neat remote oil filter block adapters. They are round with the hose
> fitting
> > threads coming out the side. Appears to have a large fitting that holds it
> > to the block via the screw on filter fitting (kinda hard to describe). It
> > can be rotated 360 degrees for oil line placement so would be good for
> > headers. Looks to be maybe an inch and a half tall. Part Number is
> CA-22595.
> > They have 4 in stock and they are $49.99. I couldn't find them on their
> web
> > site but I emailed them and they do have the 4 in stock.
> >
> > Http://www.racerpartswholesale.com
> >
> > Hope this helps someone and no, I don't get anything out of it.
> >
> > mayf
|