Thanks, Listers!
You came through again. With some some determination, and a tiny hacksaw, I
removed the bottom head of the pivot rivets.
Now about those big door screws. Other than soaking them in WD40, which I'm
doing, any tricks on how to break them loose without stripping the screw
head? They are on TIGHT!
The car is almost totally disassembled and this is my first real roadblock.
Thanks,
GH
----- Original Message -----
From: <gharlowe@comcast.net>
To: "Tiger List" <tigers@autox.team.net>
Sent: Sunday, March 09, 2003 3:02 PM
Subject: Door removal (second effort)
> Listers -
>
> Sorry to bug you...
>
> I didn't get any replies on or off line to my earlier question about how
to remove the metal door strap.
>
> I don't see any fasteners inside the kick panels. The pin in the middle
(between the door and the body) seems unmovable, and I don't see anything
obvious to do with the washer-looking keeper inside the door. I know
someone out there has taken their doors off.
>
> I do have some spare doors with the strap sawed through. I hope that's
not the preferred approach...
>
> Thanks,
>
> GH
|