tigers
[Top] [All Lists]

Re: Ford Water Pump

To: Mac & Kenda Sawhill <sawhill@earthlink.net>
Subject: Re: Ford Water Pump
From: Steve Laifman <SLaifman@SoCal.rr.com>
Date: Thu, 14 Feb 2002 22:40:58 -0800
Another source for a high flow a;uminum (not die cast pot metal) shorty
pump is Edelbrock's model for the hi-po 289. It is NOT cheap, and the
polished one is even more.

Mac & Kenda Sawhill wrote:
> 
> I just happened to be looking at a March 2002 Street Rodder Mag. and
> found a listing for a Ford Motor Company SHORT water pump and pulley
> set. The pump height is listed as 4.25" and the crank pulley is the 4
> bolt type. Could this be helpful for a late model 302 swap?
> 
> Web site www.fordracing.com/performanceparts.
> 
> The part numbers are - Pump = PN M-8501-S
>                                     Pulley = PN M -8509-Q
>                                     Pulley = PN M -8509-R
> 
> Good Luck-
> Mac Sawhill

-- 
____________________________
Steve Laifman
Editor
<http://www.TigersUnited.com>

<Prev in Thread] Current Thread [Next in Thread>
  • Ford Water Pump, Mac & Kenda Sawhill
    • Re: Ford Water Pump, Steve Laifman <=