tigers
[Top] [All Lists]

Re: Mounts for three point harness?

To: Frank Marrone <Fmarrone@turinnetworks.com>
Subject: Re: Mounts for three point harness?
From: Larry Paulick <larry.p@erols.com>
Date: Wed, 06 Dec 2000 17:58:54 -0500
Frank, you can use a MGB 3 point seat belt with this hole in the rear
fender well.  You must take out the plastic plug, I had to drill mine
out, and then there is the mounting point for the 3 point for the seat belts.

Larry

Frank Marrone wrote:
> 
> High on the rear wheel wells there is a large screw type thing inserted from
> the wheel well side of the body on my car.  The end of this screw can be
> seen from the passenger compartment side through a cut out in the inner
> sheet metal (the sheet metal is two layers thick here).  I've been told that
> this was provided as a mounting for a three point safety harness.  Can
> anyone comment on this harness and the applicability of these holes for an
> anchor point in this application?
> 
> Frank Marrone
> B9471116

<Prev in Thread] Current Thread [Next in Thread>