To: | "'tsmit@home.com'" <tsmit@home.com> |
---|---|
Subject: | Windage |
From: | "Ronak, TP (Timothy)" <Timothy.P.Ronak@akzo-nobel.com> |
Date: | Fri, 28 Jan 2000 18:25:42 -0600 |
Theo, Don't use locktite on the cap bolts where they go into the block. The torqueing of the bolts should be sufficient to stretch the bolt and maintain the torqued spec. As for the other nuts on the fine thread portion if they are 3/8" studs we used 35-40 lbs. on the Hamburger pan that we used as a crank scraper. Regards, Tim Ronak |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Bolts for roll bar, Ronak, TP (Timothy) |
---|---|
Next by Date: | Re: LAT-72 Radio Kit, Daniel S. Eiland |
Previous by Thread: | Bolts for roll bar, Ronak, TP (Timothy) |
Next by Thread: | Non Tiger infor needed, CoolVT |
Indexes: | [Date] [Thread] [Top] [All Lists] |