Theo, I have a box full of Ford OEM mounting bolts for the Boss 302 windage
tray. Just checked---6 DOZZ-6345-A, and 5359330-S2 screw & washers. I fitted
a Boss 302 windage treay to my Tiger years ago. When I got the tray, many
extra bolts were included. if you are interested, or others have a use for
them, let me know. The bolts are individually boxed. I have no use for them
now.
Al Johnson
Theo Smit wrote:
> Hi Listers,
>
> So I finally received my Canton oil pan today, and it certainly looks
> like an impressive piece. I also ordered their matching oil pump pickup,
> windage tray, and windage tray mounting kit. The mounting kit consists
> of four studs to replace the #2 and #4 main bearing cap bolts, and a
> pair of nuts each to retain the bearing caps and then jam-nut the
> windage tray on.
>
> So my question is: What's the best method for mounting the studs? Should
> I use threadlocker on the studs into the block?
> And another one: The studs have coarse thread where they thread into the
> block, and fine thread on the nut side. So should I use the standard
> torque setting? What about for the windage tray nuts?
>
> Regards,
> Theo
> tsmit@home.com
> tsmit@isotel.com
> http://members.home.net/tsmit/tiger1.html
|