As Jim says, this is an easy job requiring few if any
swear words. One thing to remember is you should find
some small rubber shims under the frame that the bolts
go through. DON'T loose these shims. They are used
to adjust the rake of the windshield and must go back on
in the same place.
NEVER reuse the body to frame gasket. Get a new one
from SS.
Rustproof the inside of the frame paying particular attention
to the lower corners. Here in the Midwest I have reports of
the entire frame crumbling from rust when windshields are
being replaces. An ounce of rustproof is worth it.
Good luck.
|