Re: Gas Cap Vent

[BlueGolfer@aol.com]

In a message dated 2/22/99 11:26:25 PM Eastern Standard Time,
jamesbrt@mindspring.com writes:

>  I prefer not to damage the pot metal
>  rivets that hold the gasket/valve? assy
>  to the chrome cover.
Jim,

When I replaced my gas cap, I popped out the old rivets, and then used some
matching diameter brass rod.  I clipped the brass rod a little long and then
gently (many small blows) peened over the edge of the brass.  So far it seems
to work.

Rob Kempinski
Melbourne Fl