tigers
[Top] [All Lists]

Re: Engine bore and heat

To: tiger list <tigers@Autox.Team.Net>
Subject: Re: Engine bore and heat
From: pamelam@connix.com
Date: Sun, 3 May 1998 20:54:38 -0400 (EDT)
>>I putting a stock 5bolt 289 engine in my Tiger. The engine has been
>>rebuilt (stock) and bored .040. 
>>                      Thanks, John
>
>        My Tiger II came with a stock 6 bolt 289.  There is little difference
>in the cooling required for the 260 and the 289.  If your 260 ran cool then
>the 289 probably will also.  If you overheated on the 260 then you have the
>same problem.  Recommend at the minimum having your original radiator
>core replaced with a new modern core.
>Jim Barrett Tiger II 351C and others

John,
My engine builder is very reluctant to bore a SB Ford beyond .030" over.
Anything beyond that is prone to having cooling problems, so Jim's good
advice on the core should be followed.

Bob Melusky



<Prev in Thread] Current Thread [Next in Thread>