----------
> From:
> To: Tigers <tigers@autox.team.net>; Doug Mallory
<rdmallory@earthling.net>
> Subject: Re: bellhousing needed
> Date: Wednesday, April 29, 1998 4:54 PM
>
>
>
> ----------
>
> > Subject: Re: bellhousing needed
> > Date: Wednesday, April 29, 1998 8:30 AM
> >
>
> > I have been running one for 2 years with out a problem. If you don't
make
> > sure
> > the master cylinder has the correct stroke and bore you will have
> problems.
>
> I have been running one of the McLeod hydraulic throwout bearings behind
a
> real heavy duty Hays clutch for several years and it works fine. I did
> have a problem with the first one I installed and returned it to McLeod.
> They said the tolerances were not to spec do to manufacture's error and
> replaced it. Because of the high pressure of the clutch the pedal effort
> is substantial even though I use a 5/8 dia clutch master. Curious what
> master cylinder you use.
>
> Bob
|