>
>I looked into that hydraulic throw-out bearing slave replacement and have
the
>following observations:
>
>1) It's damned expensive.
Yes
>2) If it needs fixing, it's "take it all apart" time, and we can argue
wether
>it's better out the top, or out the bottom.
Yes
>3) From users, they leak fluid. That's to near the clutch facing for me.
>
I have been running one for 2 years with out a problem. If you don't make
sure
the master cylinder has the correct stroke and bore you will have problems.
>MkII Tigers did very well with external 6 bolt brackets and the stock
Girling
>slave, and I believe Sunbeam Specialties has some.
>
>Steve
>
|