John forgot to add the volume above the rings and below the deck of the
block (minus the piston dish, since he did add that in there) to the unswept
volume.
LAD
----- Original Message -----
From: "Robert Weeks" <lists@woozy.com>
To: "Ron Soave" <soavero@yahoo.com>
Cc: "Spridgets" <spridgets@autox.team.net>
Sent: Sunday, March 23, 2008 7:07 PM
Subject: Re: [Spridgets] 295 head content
There is a pretty good video from University Motors on you-tube showing
how to do this:
http://youtube.com/watch?v=OGuOMItsCXk
Robert
Ron Soave wrote:
> --- Jack Laird <jlaird237@cox.net> wrote:
>
>> The question is how much decking to keep the
>> cylinder volume about the same or
>> a bit less so the compression is just a bit higher.
>> What do I need to tell my head guy needs to come
>> off
>>
>
> Jack,
> I would not rely on a predetermined amount - it's much
> safer and easy to just do the math or have the
> machinist do it:
>
> To get a decent idea, you need 5 key volumes which add
> the unswept volume, plus cylinder swept volume:
You are subscribed as ladaniels@sbcglobal.net
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|