Re: Off-idle

[Frank Clarici <spritenut@comcast.net>]

Sounds like either an off center jet or something causing the piston to 
stick.
Dirt on the piston or dome, or something in the tube where the black cap 
screws in. One grain of sand in there will really mess things up as far 
as the piston goes.
Pop the piston and dashpot, see if it works by hand on the bench.
You may also have a blown intake gasket. Loose carbs/intake?
Try rocking the whole set and see if they move.


-- 
Frank Clarici
Toms River, NJ