In the Haynes manual is states that some bearings are marked thrust on the
inner race and some on the outer race, so this would reverse the markings.
Is this a valid point Paul? Do bearings come both ways?
Thanks
Duncan
-----Original Message-----
From: owner-spridgets@autox.team.net [mailto:owner-spridgets@autox.team.net]
On Behalf Of Paul Asgeirsson
Sent: Wednesday, May 24, 2006 11:15 AM
To: Mark Endicott; spridgets list
Subject: Re: Front Wheel Bearings Thrust Face
NOT RIGHT!!!!
The thrust surfaces should be facing each other. Said another way, on each
individual wheel, the thrust sides should be towards the center of the hub.
Paul A
|