Bugeye Steering Column (Now Horn Ground)

["Mark" <mark@nashvilletn.org>]

Hey folks,

Thanks for the assist with the steering column, I loosened up the rack and 
removed one shim under the facia and it went back together nice and easy 
tonight.  In fact I did such a good job that the shaft and rack aren't 
grounded (all of the new rubber) and the horn doesn't work.  I can put a 
jumper from the end of the shaft to ground and it is fine.  I can figure a 
way to ground it but was there a "factory" way?  It had to be an issue with 
the cars when new.

Mark
Nashville