spridgets
[Top] [All Lists]

Re: steering shaft end play

To: "Phil Nase" <nase@ptd.net>
Subject: Re: steering shaft end play
From: "Peter C." <nosimport@mailbag.com>
Date: Sun, 12 Mar 2006 15:16:22 -0600
Consider drilling and installing a hardened roll pin.
         PPP
=
At 12:46 PM 3/12/2006, you wrote:

>I pulled the pinch bolt out.  It looks OK except possibly a little bent.  PO
>had a nyloc nut on it with flat washers.  The machined area around the
>splines is a little worn.  I can detect no play in the pinion with hand
>pressure only so can I assume the shims are correct?
>
>Off to buy a bolt.




<Prev in Thread] Current Thread [Next in Thread>