I pulled the pinch bolt out. It looks OK except possibly a little bent. PO
had a nyloc nut on it with flat washers. The machined area around the
splines is a little worn. I can detect no play in the pinion with hand
pressure only so can I assume the shims are correct?
Off to buy a bolt.
Phil Nase
http://home.comcast.net/~philnasecpa
|I have the dreaded steering column play. What shim material is available.
| I see it as N/A at the usual places.
|
| Phil Nase
| http://home.comcast.net/~philnasecpa
|