http://thompsoncarpentry.com/personalgallery/album09
I do this on the Miata on the brakes, and it works GREAT, havent tried it
on the clutch system yet, but I dont see why it wouldnt work
On 9/12/05, DLancer7676@cs.com <DLancer7676@cs.com> wrote:
>
> In a message dated 9/11/2005 11:15:04 PM Eastern Daylight Time,
> gottstein@gmail.com writes:
> > clutch fluid reservoir, so I'm going to fill
> > and bleed the system.
> > Has anyone figured out an easy, fast, and less messy system for doing
> this?
> >
>
> I haven't done this, but always had it in the back of my mind to do
> sometime:
> Several years ago I ran across a suggestion by a Spridget owner to install
> a
> tube in place of the bleed valve in the slave cylinder, running the tube
> up
> in the engine compartment to where you could bleed the cylinder from just
> under
> the bonnet. The bleed valve was screwed into the end of the extended tube.
> Made sense.
>
> --DAvid C.
|