I have not messed with mine, but IIRC, the switch is activated when the pedal
is OFF of
it. So it would need to be in contact with the pedal for 1/8", just in case you
barely
touch it, the lights don't come on. YMMV
Brad
chuck wrote:
> Sounds like you screw in the stop light switch in until there is a 1/8 inch
> gap to the pedal so that the pedal can move 1/8 inch before actuating
> the switch.
>
> chuck
>
> Antony Gelberg wrote:
>
> > But step 6a is killing me,
> >and I quote:"Screw in the stop light switch until there is a free movement
>of 1/8 in
> >on the brake pedal."
> >I have no idea what this means. I assume that I screw it in to the point
> >where the contact is being pressed in, but the pedal is still at the top
> >(hence not activating the brakes)?
|