When I removed the heater box from my '69 Sprite,
1275, (to refurbish and maybe never replace) I just
ran the hose from the input side to the fitting on the
head. Does it make a difference? Since it is basically
blocked when the valve is turned off anyway?
cheers, bill b.
RE:
--- dmeadow@juno.com wrote:
> It is a standard pipe thread. I'm afraid if I try
> to remember the exact size I'll get it wrong. Just
> take the mounting bit to the hardware store and
> you'll be able to fit an iron or copper pipe nipple
> to it.
> ---------- SDOliner@aol.com writes:
>
> From: SDOliner@aol.com>
> What is the size thread on the base of the heater
> control valve? I want to go
> from there to a 1/2" heater hose to the top radiator
> hose.
>
> Eliminate the heater core and control valve during
> the summer.
__________________________________________________
Yahoo! - We Remember
9-11: A tribute to the more than 3,000 lives lost
http://dir.remember.yahoo.com/tribute
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|