Dan Walters wrote:
>
> Bob, my '63 has disc brakes with a combo brake/clutch master - this was
> stock. As far as the bore size goes my original master was 3/4" but I
> replaced it with a 7/8" unit. This works fine. My understanding is that
> the bugeye came with the larger bore but I could be wrong.
Bob
Dan is correct, Any premade brake set from a 63.5 thru 66 will work on disc
brakes w/ the dual master (not tandem masters)
The drum brake cars did have a 7/8 bore master, this was cut down to 3/4" when
discs came on the cars. It stayed 3/4 bore thru the end but the laters being a
dual piston master.
And the later 68 on master will work (complete pedal box assembly) with some
minor cutting. It's very close to the wiper motor and some wiper rack bends
are needed.
--
Frank Clarici
Toms River, NJ
United We Stand
http://www.exit109.com/~spritenut
|