Bob, my '63 has disc brakes with a combo brake/clutch master - this was
stock. As far as the bore size goes my original master was 3/4" but I
replaced it with a 7/8" unit. This works fine. My understanding is that
the bugeye came with the larger bore but I could be wrong.
Dan
----- Original Message -----
From <BCAH at aol.com>
To: <spridgets@autox.team.net>
Sent: Monday, September 24, 2001 10:19 PM
Subject: brake lines
> I'm about to order a set of new , ready made , brake lines for the Bugeye
.
> It was converted by the PO to wire wheels and disc brakes up front. Which
> Spridget had the combo clutch/brake master cylinder and disc brakes? Was
it
> the '64 ? I am about to go out and measure the bore right now
,---------3/4"
> right? I did see one that had a casting number,barely visible, which said
3/4
> but measured 7/8. This one did not have a sleeve in it. Anyone else seen
> this? If anyone has this master and disc let me know so I can order the
right
> year model. Bob C
|