Bill Gilroy wrote:
>
> Subject says it all. The only way I can see to remove the bottom
> bolt that holds the clutch master cylinder to the pedal box is to
> unbolt the pedal box and get access from the bottom with an open end
> wrench. I think that is what what Haynes means by remove the two
> bolts holding the master cylinder to the pedal box :-)
>
> Anyone have an easier way? BTW, this is on a 1500 Midget.
Bill
With some patients and a 1/4" drive socket set, maybe some needle nose
pliers, you can remove the clutch master.
I have done it with out removing the pedal box.
BUT....if you DO remove the box, weld the nuts on so the next time you
have to do it, it's a piece of cake.
--
Frank Clarici
Toms River, NJ
Lots of Sprites
http://www.exit109.com/~spritenut
|