Originally on my engine I had studs and the special bolt. Now I have all ARP
studs. However, when someone as knowledgeable as David Anton at APT says to
do the front stud (was a bolt) to only 25lbs I defer to his greater knowledge
and do what he says.
Daniel1312
In a message dated 22/02/01 21:56:13 Pacific Standard Time, NewNGsInfo@cs.com
writes:
<< I agree with the use of the extra bolts, but if you are drilling and
tapping
a block, studs can go in both front and rear.... I have that on mine. I
assure you, torque is not a problem when you do it that way.... >>
|