| To: | cfchrist@earthlink.net, birdman@lightspeed.net, spridgets@autox.team.net |
|---|---|
| Subject: | Re: 1275 heads or STUDS |
| Date: | Fri, 23 Feb 2001 00:55:03 EST |
Chuck, I agree with the use of the extra bolts, but if you are drilling and tapping a block, studs can go in both front and rear.... I have that on mine. I assure you, torque is not a problem when you do it that way.... I did mine at WAY over specs. (not telling due to liability). John Carey http://ourworld.cs.com/JCareyPage/JCareyPage.htm |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Rotary & Synthetic Oil, Unknown |
|---|---|
| Next by Date: | Re: 1/2 sparkplug removal, Unknown |
| Previous by Thread: | Re: 1275 heads or STUDS, Unknown |
| Next by Thread: | Re: 1275 heads or STUDS, Unknown |
| Indexes: | [Date] [Thread] [Top] [All Lists] |