I have a question regarding the heater blower. On the dash is a 3-way rocker
switch for the heater motor. Top position is off, then there is a center and
a lower position. When the rocker is clicked to the center position, the
blower comes on. When it is clicked to the lower position, it goes back off.
There are only 2 wires going to the heater--I would assume it is only a
single speed, or there should be 3 wires?? Why the 3 way switch on a 2 wire
motor?? Has the heater been transplanted and an original 2 speed been
replaced with a single speed? It is a '79 RB Midget.
--David C.
|