Greg,
I installed one of these on the 1275 in my bugeye. The only way I could get it
on with the engine in place is with the head off. If you don't want to remove
the head, you can try unbolting all the engine, and transmission mounts , and
tilt the engine to the right, but it will probably end up taking as much if not
more time than just removing the head.
Good luck.
Bryan Vandiver (59-bugeye)
San Jose, CA
>To: "Spridgets List" <spridgets@autox.team.net>
>Subject: Installation help with Maniflow header
>MIME-Version: 1.0 charset="iso-8859-1"
>X-Priority: 3 (Normal)
>X-MSMail-Priority: Normal
>X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211
>Importance: Normal
>
>Hello fellow listers,
>
>I need to ask for a bit of assistance on the installation of the Maniflow
>LCB Exhaust header. How the @#*#%* do you install the thing? I can fit in
>backwards, but that doesn't do any good. When I try and place it in the
>correct way, it seems to keep hitting the area around the brake cylinder,
>and can't get the bottom of the header through the space behind the wheel.
>Any tips are appreciated!
>
>Greg Gowins
>'69 Sprite
>Dublin, CA
>
|