RE: Installation help with Maniflow header

["Elliott, Patrick" <patrick.elliott@attws.com>]

Ummm,,,   NO.

-----Original Message-----
From: type79@ix.netcom.com [mailto:type79@ix.netcom.com]
Sent: Saturday, September 04, 1999 7:23 PM
To: Greg Gowins
Cc: Spridgets List
Subject: Re: Installation help with Maniflow header


Greg,
If this header is similar to the LCB type header, It cannot be installed
with
the engine in place. In my experience, it must be laterally inserted between
the frame rails and then held upright while the engine is installed and then
bolted to the head.
Jay Fishbein, CT