Hi All,
Finally got around to inspecting some A-arms that I took off an
early production '75 in a pick and pull a few months ago. On the side
of the arm, next to the hole for the interior bushings, is what appears
to be a round plate, originally painted black, about the same diameter
as the bushing hole. It is riveted through the center to the A arm. In
circular raised script it says Type E56. It is on both A arms.
I have never seen this on any A arms before, either the '79
(original and replacement set) or the '66. Anything special about these
a-arms? (they are drilled for the sway bar, another guy was taking it
off as I got there)
Steve.
--
_________________
| Steve McGee,
| Atty. at large
| samesq@pacbell.net
| http://home.pacbell.net/samesq/
|________________
"Only if you are unafraid of the truth will you ever find it."
|