All who asked
I found the drawings that show the relationship of the hinge to the car and
to the bonnet. I could not find the scale drawings that I made of the hinge.
I seem to recall sending the originals to someone on the list via snail
mail, anyone out there remember? I will e-mail the one drawing that I have
to those that asked for it. It's stuck on my zip drive at the moment and the
zip is refusing to let me have it back so may have to wait until I get home.
The car goes to the painter tomorrow so I can't remake the scale drawings of
the hinge at this time.
LM
-----Original Message-----
From: Mike Gigante <mikeg@vicnet.net.au>
To: Larry and Sandi Miller <millerls@msn.com>
Date: 20 August, 1998 4:09 PM
Subject: Re: Bugeye Front-Hinging Hood
>If can find the plans, I'd like a copy too! Perhaps we can adapt it
>a bit and put it on one of the web pages.
>
>Mike
>
>-----Original Message-----
>From: Larry and Sandi Miller <millerls@msn.com>
>To: Daryl May <mayfam@sprynet.com>; spridgets@autox.team.net
><spridgets@autox.team.net>
>Date: Wednesday, August 19, 1998 10:16 PM
>Subject: Re: Bugeye Front-Hinging Hood
>
>
>>You can buy a kit from Mini Mania for about $100. I used it on the Bugeye
>>that I'm building. The only bad thing is that you have to lose the front
>>bumper. I could probably find the plans and fax them too you if you want
to
>>try and make your own.
>>
>>Larry Miller
>>
>>-----Original Message-----
>>From: Daryl May <mayfam@sprynet.com>
>>To: spridgets@Autox.Team.Net <spridgets@Autox.Team.Net>
>>Date: Wednesday, August 19, 1998 8:07 PM
>>Subject: Bugeye Front-Hinging Hood
>>
>>
>>>Does anyone have any plans for the parts that you'd need to make a Bugeye
>>>hood hinge in the front?
>>>
>>>Is this a good thing to do anyway?
>>>
>>>Thanks,
>>>
>>>Daryl
>>>
>>>
>>
>>
>>
>
>
|