I just happen to have a 70 Spit that will never see the road again. Still
want a couple of latches?
Bruce Lowry
Hallsville, Tx
60 Bugeye "Cosmo"
70 Spit
67.5 Datsun 1600
Many other large piles of car shaped junk!
Peter Samaroo wrote:
> I also have the kit from mini-mania if you have access to the steel and
> a welder you could probably duplicate for about $20 for the material.
> The kit does not include any way of latching the bonnet so you will have
> to devise some way of doing so. Either straps or bungies at the back or
> fitting some kind of latches. I am toying with the idea of spitfire type
> latches mounted on the inner footwell I just need to find a spitfire
> abandoned in a parking lot..
>
> >From: "Larry and Sandi Miller" <millerls@msn.com>
> >To: "Daryl May" <mayfam@sprynet.com>, <spridgets@Autox.Team.Net>
> >Subject: Re: Bugeye Front-Hinging Hood
> >Date: Wed, 19 Aug 1998 22:11:58 -0700
> >Reply-To: "Larry and Sandi Miller" <millerls@msn.com>
> >
> >You can buy a kit from Mini Mania for about $100. I used it on the
> Bugeye
> >that I'm building. The only bad thing is that you have to lose the
> front
> >bumper. I could probably find the plans and fax them too you if you
> want to
> >try and make your own.
> >
> >Larry Miller
> >
> >-----Original Message-----
> >From: Daryl May <mayfam@sprynet.com>
> >To: spridgets@Autox.Team.Net <spridgets@Autox.Team.Net>
> >Date: Wednesday, August 19, 1998 8:07 PM
> >Subject: Bugeye Front-Hinging Hood
> >
> >
> >>Does anyone have any plans for the parts that you'd need to make a
> Bugeye
> >>hood hinge in the front?
> >>
> >>Is this a good thing to do anyway?
> >>
> >>Thanks,
> >>
> >>Daryl
> >>
> >>
> >
> >
> >
> >
|