frank,
thanks for the respone,the needles are set properly and they both drop smartly
into the jets.
i didn't feel like recentering the jets, but it looks like i will have to
since i believe your idea to exchange needles is a good one. if nothing else
i'll know that the problem is either in the jet or the needle. the needles i
can measure (diameter) so that will leave the jet the only other variable. as
an afterthought there might be an internal fuel leaking with fuel getting by
the cork and brass washer at the top of the jet but in all honesty i doubt it.
i'll let you know how it turns out.
thanks again,
alex
|