Andy Mace Writes:
> Forgive my correcting your terminology, but do you really mean bolts?
> Usually, the spring is held to the diff. with nyloc nuts and flat washers
on
> studs. I don't know if it really makes all that much difference, but I've
> never seen before what you describe, even on spring hold-downs where
(GASP!)
> the nylocs have been reused!
>
Yes, they are actually studs with nyloc nuts and flat washers. Sorry for the
misinformation.
I reused the nylocs as they are still very tight. I had a bear of a time
getting them off of the studs to clean up the studs. Vise-Grips are
wonderful!
-Kirk
68 Mk III Spit
http://www.kirkanddonna.com/kirk/spitfire/
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|