RE: Hose to nowhere on valve cover

[doug@dougbraun.com]

At 04:34 PM 9/30/2005 +0100, you wrote:
>  There may be other, more sophisticated
>solutions out there too...

The best solution would be to connect the hose to
the intake manifold through a PCV valve, which
regulates the flow of the "blow" into the manifold.

Perhaps there is a flat spot on the manifold that
could be drilled and tapped for a PCV valve?


Doug Braun
'72 SPit (with twin SUs)


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org