I have one near Dayton, Ohio anyone is welcome to borrow.
Mike Ross
----- Original Message -----
From: "Joe Curry" <spitlist@COX.NET>
To: <MKCASPIAN1@aol.com>; <spitfires@autox.team.net>
Sent: Saturday, July 31, 2004 11:43 AM
Subject: RE: wheel bearings/tires
> John,
> As well intentioned as your shop may be, it is very difficult to remove
> the hubs without using the proper tool and end up not destroying them.
> Normal pullers put too much stress on the hub surfaces and will usually
> bend it.
>
> I'd take it somewhere else just to be on the safe side. There may be
> someone in your area that as one of these tools so check your local
> resources (clubs, etc) to see if you can find one.
>
> I have one if you are anywhere close to Southern Arizona.
|