Thinkauto is where I bought my setup
http://www.teglerizer.com/triumphstuff/75w_oilcooler.htm
even though I paid for the extra freight charges from the U.K. to
the U.S....I got better service than their distributor (B.A.T.) in Florida
was willing to offer.
The part I liked is the oil thermostat is right in the takeoff plate
under the oil filter. Made for a very clean looking installation.
Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com
----- Original Message -----
From: "Ken C" <sdspitfire@sbcglobal.net>
To: "Spit Elist" <spitfires@autox.team.net>
Sent: Saturday, January 25, 2003 12:50 PM
Subject: Re: Remote clutch bleeding & oil coolers
> Thanks, Bob. The object in question has no markings other than a name,
> "Mocal". It's a cylinder about 3-4" tall and about 1 1/2" in diameter.
There
> are 4 ports, two on one side, the others directly opposite. A Google
search
> turned up a site in England, http://www.thinkauto.com/ Looks like I have
an
> OT1 Oilstat. I will ask for some additional info.
>
> Ken C
>
> > I'd be careful about hooking up the temp control
> > because, as I remember, the oil must flow a particular
> > direction, same as a oil filter. Look closely at the
> > ports on the control and see if they are marked for
> > "in" and "out".
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|