spitfires
[Top] [All Lists]

Window alignment

To: "To: \"Craig Smith\"" <csmith1@awcwire.com>,
Subject: Window alignment
From: "Livia Haasper" <wilivhaasper@sympatico.ca>
Date: Fri, 27 Dec 2002 17:09:45 -0500
Hi Craig and Alan,
we also had this problem. What we did was, we removed the glass out of the
carrier[window regulator], cleaned the glass and the carrier, and urethane
it in, straight and level. It has functioned ever since.
Wilf and Liv

----- Original Message -----
From: "Alan Lemen" <ralemen@cableone.net>
To: "Craig Smith" <csmith1@awcwire.com>
Cc: "SpitList" <spitfires@autox.team.net>
Sent: Friday, December 27, 2002 12:03 AM
Subject: Re: Window alignment


> Craig, I often have a similar problem with the same window. The glass
> jumps out of the plastic carrier and I have to get it back in or else it
> is not aligned correctly. In fact gluing it back is on the winter job
> list. May be a similar problem. It will still roll up and down when it
> has jumped out of the carrier.
>
> Alan
>
> Craig Smith wrote:
>
> >I need some help.
> >My drivers side window when rolled up does not match the windscreen.
> >The top is too far forward.
> >I have tried to adjust with the bolts in the door but I'm at the max now.
> >It seems the carrier is not aligned correctly but I don't see a place to
> >adjust.
> >I need to fix this before I have to buy a new piece of glass.
> >I know good and well that I'm going to screw up and slam the door with
the
> >window up !!
> >
> >
> >Craig Smith
> >Office 864/289-0933
> >Fax    864/289-9645

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>