Thank you .
It is a swing spring. I just wanted to make sure that I hadn't lost a part. It
is
great to have people that can give you so much information so fast.
Richard Gosling wrote:
> Grant,
>
> That sounds right to me - this arrangement makes sure that the spring itself
> is tight down onto the diff. If the plate went down flush onto the diff,
> then the bolt load would not all be transferred through the spring leaf, and
> there is the possibility of the spring leaf moving slightly.
>
> I also remember it looking like this when I replaced my rear spring.
>
> Richard & Daffy
>
> ----------------------------------------------------------------------
> Important Notice:
> The information in this email is confidential and may be legally-privileged.
> If you have reason to believe you are not the intended recipient, any
>disclosure,
> copying, distribution or any action taken or omitted to be taken in reliance
>on
> it is prohibited and may be unlawful and you are requested to contact the
>sender
> urgently and dispose of this email
> -----------------------------------------------------------exp.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|