He He... looking through that same manual...
apparently I had idiots lights wired up on the O/D
the reverse lights, and the electric fan relay on
the radiator (stock elec fan on '80s)
Apparently I also had rigged up a wiper delay ckt.
Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com
----- Original Message -----
From: <tw1@MUW.Edu>
To: "James Carruthers" <j.carruthers@rave.ac.uk>
Cc: "spitlist" <spitfires@autox.team.net>
Sent: Tuesday, January 22, 2002 7:50 PM
Subject: Re: lights on alarm x-mac-creator="4D4F5353"
> Quoting James Carruthers <j.carruthers@rave.ac.uk>:
>
> > Does anybody know how I can fit an alarm for when I leave my
> > lights on?
> >
> > Homebrew is welcome, i made my first pcb's a couple of days
> > ago.
>
> I'd like to buzz in on this one. I picked up an item from a clearance
> table in WalMart. It's in a blister pack that is titled "Headlights
> Left-On Reminder Kit" It is made by 3M and has a part # 03796. It's
> designed to clip onto the dash light fuse.
>
> It is basically a piezo buzzer with two wires and two collars that fit
> around the ends of the fuses. The instructions (paraphrased) say to make
> sure everything but the headlights is turned off. Connect the red wire to
> the fuse for the instrument lights and touch the white wire to other
> fuses until the buzzer sounds, then turn the key on to make sure the
> buzzer goes off.
>
> I don't know how well this works. It is still low on the installation
> priority list. If you need more info, let me know.
>
>
>
> Tim Wilcox
> Information Systems Specialist
> Lowndes County Schools
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|