Paul,
Out of curiousity, what are your piston assembly and
rod assembly weights?
I'm seeing around 400g for the pistons, and 750g for
the rods.
Carter SHore
--- Paul Tegler <ptegler@cablespeed.com> wrote:
> QUESTION...
> 0.5 grams is suppose to be the optimum
> balance weight between pistons (plus pins plus
> rings)
>
> WITHOUT TOUCHING THE NEW SET HERE
> If I swap two gudgeon pins all four are within +/-
> 0.7 grams
> The pins vary the most.
> (rings vary by 0.07 grams)
>
> Is this getting picky... Should I leave well enough
> alone?
>
> The new pins weigh 99 grams. the old ones 92 grams
> Both are round, clean and true to 0.002"
>
> Both new and old pins ..you can just perceive a
> slight
> wobble of the pin in the bushing.
>
>
>
> Paul Tegler ptegler@cablespeed.com
> www.teglerizer.com
Find the one for you at Yahoo! Personals
http://personals.yahoo.com
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|