I had a simular problem about a year ago and found
that I had different needles in them. Check that they
are correct, the same and installed correctly.
Chris DeStaffany
-> Hi all,
> I have a 78 1500 with twin SUs and have just
> had them converted from
> waxstat to normal jets as well as getting it
> rebushed etc.
> The problem is that I can tune the rear carb fine
> but the front one even
> with the jet wound right up will not change engine
> speed no matter how the
> piston is lifted. There is excess petrol and at one
> point petrol came out
> the vent. The floats and valves were changed front
> to rear with no change
> and I have had the front valve seat replaced again.
> I have not seen petrol
> from the vent since I did this but there is still
> excess petrol.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|