After reading the posts about the accelerator linkage I decided to check
mine. Sure enough the cable is never opening the second barrel. Tomorrow,
I'm going to go to a bike shop and get a new cable( with the housing) and
try to install it so both barrels open. My question is do I adjust the
linkage so it idle's at 800 RPM or do I adjust the Weber screw so it idle's
right. Currently the Weber adjustment screw needs tuning but I have no
idea how it should be done until the new cable is installed.
Thanks,
Tyler
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
|