Chuck,
I noticed your e-mail and checked later, to see if anyone replied. I didn't
see any response, but I have a question for you.
My '73 had a very loose drivers seat. When I removed the seat, I noticed
the left front mount, to the base, was very loose. The bolt had been
replaced with a smaller diameter and longer one. After removing the base and
carpet, I discovered cracked metal, from the nut to the door sill and about
5" along the door sill. You say you welded the floor, I was unsure if I
should have the cracks welded from the top only, much easier, or top and
bottom.
I think if the seat didn't wobble, the floor wouldn't crack.
I didn't have rust around the nut area, but a little along the door sill
area.
Larry
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
|