spitfires
[Top] [All Lists]

RE: spitfire input shaft specs needed (single rail)

To: "'Brad Kahler'" <Brad.Kahler@141.com>, triumphs@autox.team.net,
Subject: RE: spitfire input shaft specs needed (single rail)
From: Davies William-qswi646 <William.M.Davies@motorola.com>
Date: Fri, 29 Sep 2000 14:21:13 +0100


> -----Original Message-----
> From: Brad Kahler [mailto:Brad.Kahler@141.com]
> Sent: 28 September 2000 20:16
> To: triumphs@autox.team.net; spitfires@autox.team.net;
> fot@autox.team.net
> Subject: spitfire input shaft specs needed (single rail)
> 
> What we need to know is what are the dimensions for a 
> spitfrie 1500 single rail gearbox?  Obviously we're hoping 
> that this gearbox will work as is with the Dolomite mainshaft 
> in her spitfire but I believe the odds are going to be against that!!

Brad,
        When I intended to do something similar with a Dolomite 1500 using
an 1850 Overdrive box, I picked the brains of many including the ever
helpful guru John Kipping. As the Dolomite 1500 uses the same single rail
gearbox as the Spitfire 1500, what I learned will apply equally to your
situation.
        The mainshafts are interchangeable between 1850 and 1500 single rail
gearboxes, so the simplest solution is to take the mainshaft from the 1850
box and build it into the 1500 gearbox, then everything relating to the
overdrive should fit straight onto the 1500 unit. There is difference in the
speedo drive gearing, but JK reckoned the difference would be negligible
considering the (in)accuracy of the average Triumph speedometer!
        I hope this is some help. I never got around to doing this
conversion myself as the Dolomite became surplus to requirements, and
fatherhood left me with far less time for frivolous gearbox rebuilding! 
        Cheers,
`               Bill.

---------------------------------------------------------
                            This Message sent by: 
    ^================^ 
   /                  \     William Davies 
  /                    \    Total Triumph Enthusiast 
 __ __________________ __ 
/  \  ______  ______  /  \  1959 Herald 948 Coupe Y128
\__/  \     ||     /  \__/  1959 Herald 948 Coupe 
|    A \____||____/ A    |  1959 Herald 948 Saloon
| =  H              H  = |  1960 Herald 948 Saloon Export 
=====U==============U=====  1960 Herald 948 Saloon 100% Original
\________________________/  1961 Herald 'S'
 | |                  | |   1961 Herald 1200 Coupe 
 |_|                  |_|   1964 Herald 1200 Saloon 
                            1959 Standard Atlas Pickup
Join The Herald Mailing List at:
http://www.egroups.com/group/triumph_herald

<Prev in Thread] Current Thread [Next in Thread>