Brad,
I don't think that they were glued. The process of the covers sticking to the
foam is likely due to the aging process and the heat of
the sun. I put Houndstooth covers on my 1500 seats without any adhesive and
have had no problems in 3 years.
I don't know about the headliner, since I don't have a hard top.
Joe
Bradley D Richardson wrote:
>
> Ok, I'm finally going to put the seat covers back on my Spit's seats.
> What adhesive should I use? Since it's form fitting, and since it was
> glued to the foam before I removed them, it's obvious I need some kind of
> glue. I tried contact cement, it doesn't hold at all to the foam.
>
> On another thought, the headliner in my daily driver is drooping?
> Obviously, it needs to be glued again also. Other than removing the
> entire stinking headliner, is there some kind of gizmo that will let me
> shoot the glue thru a small 'pin hole' in the liner?
>
> Brad
>
> ====================================================
>
> Brad Richardson
> Portland, Oregon
> 79 Spitfire (FM90541U, really a 78 as made June 78)
> 79 Spitfire (TFZDW29T001453, really a 80 as made Nov 79)
> ________________________________________________________________
> http://dl.www.juno.com/get/tagj.
|