Craig, I recently put a Crane PS20 40kv coil with ballast in my 76.
Crane recommended 35-45 thou. for the plug gap. I set at 44 thou (easiest with
my feeler guages and she runs fine. I think Pat is running 40 thou in his (
email downloads at home, and I'm at work so can only see current mail.)
Alan
Original Message:
-----------------
From: Craig Smith CraigS@iewc.com
Date: Tue, 18 Jul 2000 12:19:46 -0500
Subject: Plugs
Just bought me some new Bosch Platinum
I'm running the Mallory Chrome coil with ballast.
I have had the head shaved .020
Running the original Stromberg carb.
Have a long Flow header installed with Monza exhaust
What is the lists recommendation for a gap on the plug ?
Plus, if I do open it up, what is the best way to do it ?
The electrode looks like a screwdriver stuck in it will break it. This is my
first time with Platinum plugs and they look a little different on the
business end.
Craig Smith
36 Pelham Ridge Drive
Greenville, SC 29615
800/692-2323 ext. 2105
864/234-1020 fax
e-mail: craigs@iewc.com
-------------------------------------------------------------------
This message has been posted from Mail2Web http://www.mail2web.com/
Web Hosting for $9.95 per month! Visit: http://www.yourhosting.com/
-------------------------------------------------------------------
|