Patrick, try:
-lever out the rubber seal at the rear where the reservoir mounts to the
assembly.
-gently remove the metal dowel the can be seen forward of the hole where the
fluid flows,
-hopefully, that will solve the problem.
Best wishes,
Nick Moseley
-----Original Message-----
From: Patrick Baize <speedracre@netzero.net>
To: Spitfires@autox.team.net <Spitfires@autox.team.net>
Date: Saturday, February 05, 2000 5:38 PM
Subject: Master brake cyl
>
>Hi All
> I have disassembled my 74's Master Brake Cylinder. I can not get
>the
>rear piston shaft out. Its feels as though there is something holding it
>in place.
>
>I push it back with a screw driver. Then let go. It springs forward a
>bit and stops
>as if there were a circlip there stopping it
>
>Any Ideas?
>
>THnx
>Pat
>63 Spitfire (waiting silently)
>74 Spitfire (just got its battery box)
>68 Chevy C10 (getting impatient)
>
>
|