Craig Smith wrote:
> I'm still trying to untangle my wiring problem on my 71 Spit!
> I was hooking the hazard switch up and did ok, I need a purple wire but I
> think I found it with one of those push type connectors without the other
> end need to plug into the switch. No problem with that (If I'm right).
>
> The major question is, What is the unit attached to the back of the speedo ?
> It takes some wires but which ones ?
> I don't see it listed in the Haynes manual.
>
> Also the Haynes list #17 as instrument lamps but also shows a round thing as
> # 17. What is that duelolly ?
>
> Help !!!!!!!
Craig
If the unit on the speedo you're referring to is rectangular
with two terminals I believe it is the voltage stabilizer
#35 on the Haynes wiring diagram. I think it should have
several dark green wires on one terminal and two light green wires
from the other terminal to the fuel and temperature gauges.
As for item 17 in the Haynes when I compare it to other wiring
diagrams in my Bentley manual it appears to be the symbol for
the headlight dip switch. This is just a guess but I hope it helps.
If you can I would try and get the correct Bentley manual for your
car as it has much clearer diagrams than the Haynes manual.
Cheers
Chris Taylor
75 Spitfire
Burlington, Ontario
|