At 06:36 PM 11/10/99 -0500, Tony Gordon wrote:
>
> The tapered part is so loose that
>it doesn't want to grip the taper in the top of the vertical link (and I
>hope the taper in the link isn't knackered and is still servicable after
>all all!) and so we're having a lot of fun trying to undo the nyloc nut
>which twirls away quite happily without budging an inch. Have tried
>"holding" the upper wishbone and the link together ... no luck, the nut
>still spins.
>
Tony,
On other cars I have cut a "screwdriver slot" into the bottom of the
threaded portion so I can prevent it from turning while loosening the nut.
I used a Dremel and a cutting wheel to make the slot.
Good Luck,
Atwell Haines
'79 Spitfire
Succasunna, NJ USA
|