I had good luck with a hacksaw, you can cut between the Trunnion and a-arm.
Then just drive the whole mess out of the trunnion.
Good luck
Pat 63 Spitfire (in assembly)
gfaber wrote:
> Hello to the List
> Im upgrading my front suspension with new urethane bushings and shocks
> and found my trunions were really sloppy, so I removed the lower nut to
> the trunion and the bolt spins freely, but all the pounding in the world
> won't drive that sucker out, Im figuring its froze to the sleeve, any
> tips on getting it out besides drilling it out? I figure that's my last
> option
> Regards
> Gerry
>
> 80 spitfire
> Honey Brook, Pa
http://www.netzero.net/download/index.html
|